Divider issues

[mcostales84]

Why amd I seeing a line after the bottom divider? I added the divider as a raw content.
Also, when I add a divider on the top, I can’t see it, is not showing up.
And last question, how can I add a divider to the header?
This is the URL, but still very empty: https://new.graph-code.com/

[prakash_s]

Hello @mcostales84,

Thanks for writing to us.

It seems that you have added the section lower background image. To get rid of the extra line you need to remove the section’s lower background image.

If you are adding the section divider on the top you need to adjust the settings of the element since the Inset default value is 1px so it would not be visible.

For Header divider
You can use the Raw content element and through the SVG you can add the divider since there is no option to add a separator in the Header Bar like section or you can use the Global block where you can use the section and then add section there and use the Global block in the header.

Global Blocks | Themeco Docs

Hope it helps
Thanks

[mcostales84]

What do you mean by this? This is how I’m putting that background there:

It seems that you have added the section lower background image. To get rid of the extra line you need to remove the section’s lower background image.

What’s the value I should put? I tried with 100px and same thing:

If you are adding the section divider on the top you need to adjust the settings of the element since the Inset default value is 1px so it would not be visible.

And finally, How can I make the svg to be full width?

For Header divider
You can use the Raw content element and through the SVG

I added a secure note with the access, so you can take a look. Thanks a lot

[ruenel]

Hello @mcostales84,

Are you trying to create something like this?

You should add an empty section at the top and then apply a bottom separator on that section. I have made an example in your page.

For the SVG to be fullwidth, it should be added in a Raw Content element inside the Column that the Row element size is set to have a width of 100%.

Hope this helps.